| 
BCB MODEL HEAT INSULATING GEAR
PUMP
●Applacation Scope:
This series of heat insulating gear pump is
used to transfer different medium, such as heavy
oil,asphalt,resin,detergent and glue ,which not
includes solid particles and the temperature not
higher than 300℃,with solidifying character under
the normal temperature. It also applies to the
site with heatinsulated requirement in the process
technology and outdoors installation at very cold
area. |
●使用說明:
This series of heat insulating gear pump belongs
to external gear pump. The tooth form is composite
formed by arc and sine curve. it could transfer
many kinds of medium with steady output flow and
pressure. There are heat insulating jacket and
inlet and outlet joints on the pump casing , so
it could adopt the media such as heat-conducting
oil, steam, hot water and coldwater to heat ,keep
warm and cooling then transferred medium and pump.
When the viscosity of viscosity of transferred
medium is larger than ，1500cSt，speed should be
reduced. |
Model Explanations
CB---------Gear Pump
5----------Capacity 5 m3/h
0.36--------Differential Pressure 0.36MPa
B----------Heat Insulating Type
|
